To connect SMAUG to Router for on-line data acquisition, two command files WAKEUP.COM and RESTART.COM residing in [HANCHAR.SMAUG] can be used. For completeness, they are listed as below. The questions asked are self-explanatory.

WAKEUP.COM

$ ON ERROR THEN CONTINUE
$ ON SEVERE ERROR THEN CONTINUE
$ ON WARNING THEN CONTINUE
$ ON ERROR THEN CONTINUE
$ NOTIFY
$ ROUTER
$ ON ERROR THEN CONTINUE
$ ON SEVERE ERROR THEN CONTINUE
$ ON WARNING THEN CONTINUE
$ INQ P1 "TAPE START?"
$ IF .NOT. P1 THEN GOTO AA
$ @DAQ:TAPSTRT
$ AA:
$ INQ P1 "SCALER START?
$ IF .NOT. P1 THEN GOTO AB
$ @DAQ:SCLSTART
$ AB:
$ INQ P1 "SPY START?
$ IF .NOT. P1 THEN GOTO AC
$ @SPY
$ AC:
$ MAKE SMG$INPUT
$ SEND/SAMPLE 1,12 SMG$INPUT
$ CONNECT/CONSUMER/PRIO=9/ INPUT=SMG_ INPUT SMAUG SMG$INPUT SMAUG
$ ASSIGN TT SYS$INPUT
$ CONNECT/TERMINAL SMG_ INPUT

RESTART.COM

$ WRITE SYS$OUTPUT "Here we go...."
$ MAKE SMG$INPUT
$ SEND/SAMPLE 1,12 SMG$INPUT
$ CONNECT/CONSUMER/ INPUT=SMG_INPUT SMAUG SMG$INPUT SMAUG/PRIO= 14
$ ASSIGN TT SYS$INPUT
$ CONNECT/TERMINAL SMG_INPUT